M. Benguediab, M. Mazari , N. Ranganathan Determination of the necessary energy for creating fatigue cracks by the measurements of microhardness - Journal of Testing and Evaluation Vol 5, 2001
http://www.journalsip.astm.org/JOURNALS/TESTEVAL

M. Benguediab , M. Belhouari and N.Ranganathan Computation of size of the plastic zone in mode I for elasto-plastic behaviour material - Journal of Materials Science and Technology - Vol.09 N°03 - 2001

M. Benguediab, M. Mazari , N. Ranganathan and M. Zemri A Quantitative Analysis of Fatigue Fracture Surfaces in Aluminum Alloy 2024 T 351 - Journal of Materials Science And Technology - (Vol.09 N°02 - 2001)

A. Khalfi, Th. Charlier, Eitan Abraham and David S. SmithElectromagnetic coupling in small grain Yba 2 Cu 3 O 7 - d superconducting ceramics : full hallow cylinders - PHYSICA C - 350 (2001)
http://www.elsevier.nl/locate/physc

M. Mazari , B.Bouchouicha, A. lousdad, M. Benguediab
Estimation of the Energy for Crack Creation Using Micro-Hardness Measures for Aluminium Alloy 7075 T7 and an E 460 Steel - Journal of Materials Science and Technology - ( Vol.11 N°01 - 2003)

M. Mazari , A.Lousdad ,M. Benguediab, and N. Ranganathan
Influence of Certain Structural and Mechanical Parameters on the Resistance to the Crack for an Aluminium Alloy 7X75 T7351 by an Energetic Approach - Journal of Materials Science and Technology - (Vol.11 N°03 - 2003)

Z. Nabi, A. Kellou, S. Meçabih, A. Khalfi, N.Benosman
Opto-electronic properties of rutile SnO 2 and orthorhombic SnS and SnSe compounds - Materials Science and Engineering B - B 98(2003 )
http://www.elsevier.com/locate/mseb

K. Benyahia, Z. Nabi, A. Tadjer, A. Khalfi
Ab-initio study of the structural and electronic properties of the complex structures of RuO 2, Physica B - 339 ( 2003 )
http://www.elsevier.com/locate/physb

A. Leboukh, A. Khalfi , A. Addou
Kinetic Of liquid transport in ethylene vinyl acetate beat - Material Science Research India - (Vol. 03, N° 17 - 2005)
http://www.materialsciencejournal.org/MSRIAbsSrch.asp

M.Zemri, M. Benguediab and M. Mazari
A Crack Propagation Under Variable Amplitude Loading Based on an Energetic Parameters Analysis Journal of Materials Science and Technology - (Vol.14 N°02 - 2006)
http://jsmt.ims.bas.bg

E. Cazy, A. Khalfi, D.S. Smith, M.Huger and J.P. Bonnet
Abnormal oxidation behavior of Yb a2 C u3 O 7d ceramics - Journal of Materials Science - Volume 42, Number 15 / August, 2007
http://www.springerlink.com/content/  

A. Miloudi , M. Benguediab, M. Mazari, N. Ranganathan
Fatigue Crack Propagation under Reduced Spectrum Analysed by using the Crack Close Model - Journal of Materials Science and Technology - (Vol.14 N°03 - 2007)
http://jsmt.ims.bas.bg

B. Bouchouicha, M. Mazari, A. Imad, M. Benguediab, A. Lousdad
Influence of Welding Condition on the Mechanical Behaviour of a Welded Joint in Austenitic Stainless Steel - Journal of Materials Science and Technology - (Vol.14 N°03 - 2007)
http://jsmt.ims.bas.bg

M. Mazari, B. Bouchouicha, M. Zemri, M. Benguediab, N. Ranganathan
Fatigue Crack Propagation Analyses based on Plastic Energy Approach - Computational Materials Science - (Vol.41 issue 3 -January 2008).
http://www.elsevier.com/locate/commatsci

M. Zemri, M. Mazari, B. Bouchouicha , M Benguediab, N Ranganathan
Determination of the energy for crack creation using micro-hardness measures . Vol.155 Number 1 pp 33-42- ISSN: 0376-9429 , (2009)
http://www.springerlink.com/content/554p72479422tw30/

B. Bouchouicha, M. Zemri , M. Benguediab, A. Imad
Influence of the feffite rate on the tenacity of a welded joint in austenitic stainless steel : Experimental studay and numerical modeling Computational Materials Science Vol.45 336-341- ISSN 0927-0256 , (2009)
http://www.elsevier.com/locate/commatsci

K. Benyahia, Z. Nabi, Raeev Ahuja, A. Khalfi
Magneto-optical Kerr effect (MOKE) of the rare-earth silicide ErSi2 using ab-initio calculations. Current Applied Physics Vol.9 Issue 5 925-927 - ISSN: 1567-1739, (2009)
http://www.sciencedirect.com/science/journal/15671739

K. Benyahia, Z. Nabi , Rajeev Ahuja, F. Boukabrine, A. Khalfi
Ab-initio calculations of the optical and magnetic properties of erbium silicide ErSi2 Journal of physics and chemistry of solids Vol. 70 pp 1378-1384 - ISSN: 0022-3697, (2009)
http://www.elsevier.com/locate/jpc

F. Boukabrine, F. Chiker, H. Khachai, A. Haddou, N. Baki, R. Khenata, B. Abbar , A. Khalfi
Ab initio calculation of ZnSiAs 2 and CdSiAs 2 semiconductor compounds Physica B 406 (2011) 169-176
www.elsevier.com/locate/physb

F. Boukabrine, F. Chiker, H. Khachai, A. Haddou, N. Baki, R. Khenata, B. Abbar , A. Khalfi
Ab initio calculation of ZnSiAs 2 and CdSiAs 2 semiconductor compounds Physica B 406 (2011) 169-176
www.elsevier.com/locate/physb

A. Miloudi, M. Zemri, M. Benguediab, M. Mazari, A. Amrouche
Crack Propagation under Variable Amplitude Loading
Materials Research. 2013; 16(5): 1161-1168

A. Miloudi, A. Laid, M. Benguediab. and A. Amrouche
Effect Of The Repair Parameter On The Lifetime Of Bonded Composite Repair In Aircraft Structure
International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 3, March – 2013

www.ijert.org
M. Benguediab, M. Mazari, N. Ranganathan
Analysis of fatigue fracture surfaces in aluminum alloy 2024 T351. IJMMME 2013

Z. Semari, A. Aid, A. Benhamena, A. Amrouche ,M. Benguediab, A. Sadok, N. Benseddiq
Effect of residual stresses induced by cold expansion on the crack growth in 6082 aluminum alloy,
Engineering Fracture Mechanics 99 (2013) 159-168
www.sciencedirect.com/science/journal/00137944/99

D.  Benarbia, M. Benguediab, S. Benguediab
Two-dimensional Analysis of Cracks Propagation in Structures of Concrete.
ETASR - Engineering, Technology & Applied Science Research Vol. 3, _o. 3, 2013, 429-432
etasr.com/index.php/ETASR/article/view/300/187

N. Selini , M. Elmeguenni, M. Benguediab
Effect of the Triaxiality in Plane Stress Conditions Triaxiality Effect in a PVC material
ETASR - Engineering, Technology & Applied Science Research Vol. 3, _o. 1, 2013, 373-380
etasr.com/index.php/ETASR/article/view/302

S. A Reffas  , M. Elmeguenni, M. Benguediab
Analysis of Void Growth and Coalescence in Porous Polymer Materials
Coalescence in Polymer Materials
ETASR - Engineering, Technology & Applied Science Research Vol. 3, _o. 3, 2013, 452-460
etasr.com/index.php/ETASR/article/view/330‎

S. Zengah   , A. Aid , M. Benguediab
Comparative Study of Fatigue Damage Models Using Different Number of Classes Combined with the Rainflow Method
ETASR - Engineering, Technology & Applied Science Research Vol. 3, _o. 3, 2013, 446-451
etasr.com/index.php/ETASR/article/view/325/190‎

M. Benachour, M. Benguediab and N. Benachour
Notch Fatigue Crack Initiation and Propagation Life Under Constant Amplitude Loading Through Residual Stress Field
Advanced Materials Research Vol. 682 (2013) pp 17-24
Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/AMR.682.17

F. Z. Kettaf, M. S. Houari, M.  Benguediab  and A. Tounsi
Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model
Steel and Composite Structures, Vol. 15, No. 4 (2013) 399-423
DOI: http://dx.doi.org/10.12989/scs.2013.15.4.399

M. Kerboua, A. Megnounif, M. Benguediab, KH. Benrahou, F. Kaoulala.
Behavior in Stress and Deformation Sands for Asphalt Mixes.
International Journal of Engineering Research & Technology (IJERT)Vol. 2 Issue 8, August - 2013

H.M. Meddah, B. Ould chikh, A. Benhamena, M. Benguediab, B. Bouchouicha
Effect of the Mechanical Properties and Mode Loading on the MechanicalBehaviour of Weldment: A Numerical Analysis
Materials Research. 2013; 16(4): 853-859

A. Djebli , A. Aid, M. Bendouba , A. Amrouche , M.Benguediab, N.Benseddiq A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy International Journal of Non-Linear Mechanics51 (2013) 145–151
www.elsevier.com/locate/nlm  

M. Benachour, N. Benachour, M. Benguediab          
Effect of Single Overload Ratio and Stress Ratio on Fatigue Crack Growth
World Academy of Science, Engineering and Technology             
 International Journal of Mechanical, Industrial Science and Engineering Vol:7 No:12, 2013

M. Benachour, N. Benachour, M. Benguediab
Fatigue Crack Initiation of Al-Alloys “Effect of Heat Treatment Condition”
World Academy of Science, Engineering and Technology
International Journal of Mechanical Science and Engineering Vol:7 No:11, 2013

M. Kerboua , A.Megnounif, M. Benguediab, K.H. Benrahou, F. Kaoulala
Bituminous Materials with a High Resistance to Flow Rutting
American Journal of Civil Engineering and Architecture, 2014, Vol. 2, No. 1, 1-11 Available online athttp://pubs.sciepub.com/ajcea/2/1/1 © Science and Education Publishing DOI:10.12691/ajcea-2-1-1

M. Karboua, M. Benguediab, A. Megnounif, K. H. Benrahou, Kaoulala
Semi active control of civil structures, analytical and numerical studies
ELSEVIER, Physics procedia 55 (2014) 301-306
www.sciencedirect.com

M. Benachour, N. Benachour, M. Benguediab, F. Z. seriari
Prediction of fatigue crack growth of repaired Al-alloy structures with double sides
 ELSEVIER, Physics procedia 55 (2014) 83-89
www.sciencedirect.com

Y. Kambouz, M. Benguediab, B. Bouchouicha
Numerical analysis of crack progress in different areas of a friction stir welded bead for an 5251 H14 aluminium alloy specimen.
Engineering technology & applied science research, Vol. 4, No. 1, 2014, 581-586
www.etasr.com

A. Djebli, A. Aid, M. Bendoba, A. Talha, N. Benseddiq, M. Benguediab, S. Zengah
Uniaxial fatigue of HDPE-100 pipe experimental analysis
Engineering technology & applied science research, Vol. 4, No. 2, 2014, 600-604
www.etasr.com

A.Aid, Z. Semari, M. Benguediab
Finite element method investigation of the effect of cold expansion process on fatigue crack growth in 6082 aluminum alloy
Modeling and numerical simulation of material science, 2014, 4, 25-31
http://www.scirp.org/journal/mnsms

M. Bendouba, A. Aid, M. Benguediab
Fatigue life prediction of composite under two block loading
Engineering technology & applied science research, Vol. 4, No. 1, 2014, 587-590
www.etasr.com

S. Maachou, M. Benguediab, M. Mazari, N. Ranganathan
Fatigue crack propagation under variable amplitude loading analyses baszd on plastic energy approach
Materials engineering – materialové inzinierstvo 21 (2014) 68-79
www.websupport.sk.

K. El-Ahmar, M. Benguediab, B. Bouchouicha, M. Mazari, M. Zemri
Modeling the damage of welded steel using the GTN model
Materials engineering – materialové inzinierstvo 21 (2014) 142-152
www.websupport.sk.

M. Benachour, B. Zeggai, N. Benachour, M. Benguediab, A. Belmokhtar
Prediction of fatigue crack growth of aged hardening Al-alloys under variable amplitude loading
Advanced material research Vols. 891-892 (2014) pp 1729-1735
www.scientific.net

A. Aid, Z. Semari, M. Benguediab
Cold expansion effect on the fatigue crack growth of Al 6082: numerical investigation
Structural engineering and mechanics Vol. 49, No. 2 (2014) 225-235
http://dx.doi.org/

A. Benhamena, L. Aminallah, A. Baltach, A. Aid, M. Benguediab, A. Amrouche, N. Benseddiq
The fretting fatigue behavior of bolted assemblies
Engineering Material, Advanced Structured Materiels 54, DOI:10.1007/978-3-319-07383-5_14
Springer International Publishing Switzerland 2014

A. Benhamena, L. Aminallah, A. Aid, M. Benguediab
Temperature parameter effect on the fracture behavior of the polymer material: case of HDPE
Journal of International Scientific Publications: Materials, Methods and Technologies Vol 8, ISSN 1314-7269
www.scentific-publications.net

A. Slimane, B. Bouchouicha, M. Benguediab, S. A. Slimane
Contribution to the study of fatigue and rupture of welded structures in carbon steel-A48 AP: Experimental and numerical studay
Trans Indian Inst Met DOI 10.1007/s12666-014-0477-5

A. Slimane, B. Bouchouicha, M. Benguediab, S. A. Slimane
parametric study of the Gurson-Tvergaard-Needleman Model of structures in carbon steel-A48 AP.
Journal of Materials Research and Technology, JMRTEC-142.No. of Pages 7.
www.jmrt.com.br

M. Kerboua, A. Megnounif, M. Benguediab, K. H. Benrahou, F. Kaoulala
Vibration control beam using piezoelectric-based smart materials
Composite structures 123(2015) 430-442 ELSEVIER
www.elsevier.com/locate/compstruct

A. Aid, M. Bendouba, M. Benguediab, A. Amrouche
Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method
Springer international publishing Switzerland 2015, DOI: 10.1007/978-3-319-14532-7_44

F. Hadjoui, M. Benachour, M. Benguediab, A. Hadjoui
Crack propagation of aluminum alloy 2024 T351 under constant amplitude loading using crack closure concept
Applied Mechanics and Materials Vol. 749 (2015) pp 327-333
www.scientific.net/AMM.749.327#

M. Touati, A. Tounsi, M. Benguediab
Effect of deformation on adhesive stresses in plated concrete beams : Analytical solutions
Computers and Concrete, Vol.15, No.3 (2015) 141-166
DOI/ http://dx.doi.org/10.12989/cac.2015.15.3.141

A. Djebli, M. Bendouba, A. Aid, A. Talha, N. Benseddiq, M. Benguediab
Fatigue life prediction and damage modelling of high-density polyethylene under constant and two-block loading
Procedia Engineering 101 (2015) 2-9. www.elsevier.com/locate/procedia