UDL VRPG - Matériaux et Systèmes Réactifs

Matériaux et Systèmes Réactifs

Imprimer

Détails: Catégorie parente: Production Scientifique; Catégorie : listedeslaboratoires; Création : 4 janvier 2017

Directeur: Pr. MAZARI Mohamed ICI LMSR

Publications

2016	Experimental and numerical analysis of the polyvinyl chloride (PVC) mechanical behavior response Khellafi H., Meddah H. M., Ould Chikh B., Bouchouicha B., Benguediab M., Bendouba M., Copyright © 2016 Tech Science Press. CMC, Vol.49, No.1, pp. 31-45
2016	Valorization of carbon dioxide by convertion into fuel using renewable energy in Algeria Recioui B., Settou N., Khalfi A., Gouareh A., Rahmouni S., Ghedamsi R., Elsevier, journal homepage: Transportation Research Part D 43, pp.145-157
2016	Energetic and exergetic analyses of adsorption heattransformer ameliorated by ejector, Alami A., Makhlouf M., Lousdad A., Khalfi A., Benzaama M.H., Springer, ISSN 1678-5878, Vol38, N7
2016	Study of the effect of sun patch on the transient thermal behaviour of a heating floor in Algeria Benzaama M.H., Lachi M., Maalouf C., Mokhtari A. M., Polidori G., Makhlouf M., Energy and Building 233, 257-276
2016	Gis-basedmethod for future prospect of hydrogen demand in the algerian road transport sector Rahmouni S., Settou N., Negrou B., Gouareh A., International journal of hydrogen energy 41, pp. 2128-2143
2016	Prospects of hydrogen production potential from renewable resources in Algeria Rahmouni S., Negrou B., Settou N., Gouareh A., International journal of hydrogen energy XXX (2016) 1-13
2016	Modeling and forecasting energy consumption for residential buildings in Algeria using bottom-up approachGhedamsi R., Settou N., Gouareh A., Khamouli A., Saifi N., Recioui B., Dokkar B., Energy and Buildings 121, pp. 309-317
2016	A Strain energy density theory for mixed mode crack propagation in rubber-like materials Boulenouar A., Benseddiq N., Merzoug M., Benamara N., Mazari M., Journal of Theoretical and Applied Mechanics, ISSN 1429-2955, 54, 4, pp. 1417-1431, Warsaw 2016
2016	Finite element analysis of the behaviour of a crack in the orthopediccement Benouis A., Boulenouar B., Serier B., Journal of Theoretical and Applied Mechanics, ISSN 1429-2955, 54, 1, pp. 277-284, Warsaw 2016
2016	Plastic energy approach prediction of fatigue crack growth Maachou S., Boulenouar A., Benguediab M., Mazari M., Ranganathan N., Structural engineering and Mechanics, ISSN:1225-4568, Vol. 59, No.5, pp. 885-899
2016	Heat transfer enhancement in a parabolic trough solar receiver using longitudinal fins and nanofluids Benabderrahmane A., Aminallah M., Laouedj S., Benazza A., Solano J. P., Journal of thermal Science, Vol.25, No.5 410-417
2016	Experimental analysis and damage modeling of high-density polyethylene under fatigue loading Djebli A., Bendouba M., Aid A., Talha A., Benseddiq N., Benguediab M., Acta Mechanica Solida Sinica, ISSN: 0894-9166, Vol. 29, N° 2
2016	The influence of the growth cavity on damage of welded steel El-Ahmar K., Benguediab M., The International Journal of Advanced Manufacturing Technology, Springer, Vol. 87, Issue 1, pp 373–380
2016	Effect of compressive residual stress generated by plastic preload on fatigue initiation of 6061 Al-alloy Benachour M., Benachour N., Benguediab M., , Procedia Structural Integrity 2, pp.3090-3097
2016	Three-dimensional finite element analysis of fracture behavior of adhesively bonded single lap-joints Djebli A., Benhamena A., Aminallah L., Aid A., Benguediab M., Amrouche A. MECHANIKA, ISSN 1392-1207, Vol. 22(5), pp. 371-375

Conférences

2016	Estimation de la taille et la forme de la zone plastique par la mesure de microdurete cas de l’acier E460 MessabihF. Z., Bouchouicha B., 9ieme edition de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Caractérisation thermomécanique des joints soudés en acier A510AP Maouadj Z., Bouchouicha B., Zemri M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Investiguation de la qualité des assemblages soudés par FSW vis-à-vis des paramètres du procédé Elmeguenni I., Bouchelarm M., Arab M., Mazari M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	A strain energy density theory for mixed mode crack propagation in rubber-like materials Zerrouki A., Boulenouar A., Mazari M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Modélisation d’endommagement des assemblages mécaniques boulonnés sous solicitation de fretting Sehoul M., Benguediab M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Comparaison entre le soudage FSW et le soudage bout pour le polyethylene à haute densité (PEHD) Kaid M., Zemri M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Influence des défauts sur la durée de vie des structures en fatigue des allaiges d’aluminium Brahami A., Bouchouicha B., Adim S. A., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Proposition d’un model de propagation de fissure ductile sous un chargement monotone par la méthode X-FEM, Brahami A., Adim S.A., Bouchouicha B., 29 IEME EDITION de JET 016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	L’influence de l’austénisation et la trempe sur la composition microstructural de l’acier faiblement allié C45 Blaoui M. M., Zemri M., 9IEME EDITION de JET 2016 International congress for applied mechanics, 03-04-05 Mai 2016, Hammamet, Tunnisie
2016	Fracture toughness evaluation for high-density polyethylene materials in impact Cherief M.N.D.N., Benguediab M., International conference on advances in science, ICAS 2016, 31-02 September 2016,Istanbul, Turkey
2016	Effect of austenitizing temperature and cooling rate on mechanical properties of steel 45 Blaoui M. M., Zemri M., International conference on advances in science, ICAS 2016, 31-02 September 2016,Istanbul, Turkey
2016	Etude expérimentale de l’efficacité énergétique d’un plancher direct Benzaama M. H., Lachi M., Mokhtari A., Maalouf C., Menhoudj S., Aminallah M., 3rd International Conference on Energy, Materials, Applied Energetics and Pollution (ICEMAEP’16), 30-31 octobre 2016, Constantine, Algérie
2016	Fatigue behavior of welded joints in X70 Deliou A., Bouchouicha B., Oudjani B., Fergani N., Attoui I., 7th African conference on non-destructive testing, The 5th International conference on welding, Non Destructive testing materials and alloys industry (ACNDT 2016 & IC-WNDT-MI’16), 26-28 November 2016 Oran Algérie
2016	Failure of symmetric composite laminates with various reinforcement arrangements Deliou A., Bouchouicha B., Oudjani B., Fergani N., Attoui I., 7th African conference on non-destructive testing, The 5th International conference on welding, Non Destructive testing materials and alloys industry, (ACNDT 2016 & IC-WNDT-MI’16), 26-28 November 2016 OranAlgérie
2016	The Distance effect Between the tubes on horizontal ground heat exchange Ben Maachou M., Benazza A., The third international conference on FRACTURE MECANICS-Engineering applied fracture mechanics and environment,”Fract3”, 27-30 November 2016, Chlef, Algérie
2016	Mechanical characterization of the bead welding of high-density polyethylene (HDPE) Belaziz A., Mazari M.,The third international conference on FRACTURE MECANICS-Engineering applied fracture mechanics and environment, ”Fract3”, 27-30 November 2016, Chlef, Algérie
2016	Identification of the damage in the bone cement of the total hip prostheses Benouis A., Boulenouar A., Belgherras M. E., Serier B., Benbarek S., 10èmes Journées de Mécanique de L’EMP (JM’10-EMP), 12-13 avril 2016, Bordj El-Bahr, Algérie
2016	Study of damage in the orthopedic cement THR, Evolution of stress intensity factor Benouis A., Boulenouar A., Zagane M. E., Bouchikhi A. S., Serier B., la Journée Algérienne de Biomécanique et Innovation en Biomatériaux (JABIBio ‘16). 15 Mai 2016, Oran, Algérie
2016	Modélisation du comportement mécanique d’un contact assuré par tension du boulon Sehoul M., Benguediab M., Benhamina A., 6ème Séminaire National sur les Matériaux, Procédés et Environnement. SNMPE’16, 07-08 Nov. 2016, Boumerdès Algérie